Choosing an Amplifier

The addition of an amplifier and suitable speakers can enhance any car audio system. In this article we will cover the most of the decisions that need to be made when choosing an amplifier for your car.

How Much Power?

Some people will say that you can never have enough power! The power output of the amplifier will ultimately govern the maximum volume that will be available in the system. However the power output of the amplifier must be carefully matched to the power that the speakers can handle. The values that should be matched are the RMS output value of the amplifier and the RMS input value of the speakers. Speakers often supply the peak music input power as well but this shouldn't be confused with the RMS value. The peak value is the power that the speaker can sustain for short bursts but not continuously.

If the RMS input power of the speaker is regularly exceeded then it will lead to premature failure of the speakers which will probably be caused by a mechanical failure.

How Many Channels?

The number of channels correspond to the number of speakers that can be driven from a single amplifier. The most popular choices are either 2 or 4 channels.

4 channel amplifiers often give the ability to create a bridged connection. This is where 2 channels are combined to give approximately twice the output of a single channel. This gives some flexibility in the system for example you could use 2 channels to power the high/mid range speakers and a single bridged channel for the sub-woofer to give some extra depth to the sound.

Amplifier Inputs

One common problem that maybe experienced is when the factory head unit is to be maintained. The input connections to an amplifier usually consist of a set of RCA sockets. If you are lucky the head unit will provide RCA output connections which can be directly connected to the amplifier. In the majority of cases some kind of adapter will be required to reduce the output level of the head unit to a suitable value for the input of the amplifier.

Power Supply

The supply that the amplifier is connected to is vital to ensure a pure clean sound. To get the optimum sound the supply cables should be routed directly to the battery ideally keeping the cables as far from the other cables as possible. This is to prevent any spurious 'noise' being picked up which will manifest itself as buzzes, hums and clicks on the audio from the amplifier.

The amplifier itself is switched on and off by connecting the supply usually used for an electric aerial straight to the remote input of the amplifier.

If buzzes, clicks and hums are present on the audio then a choke can be placed in series with the power supply lines which will reduce and hopefully eliminate it.

Location

The final point that shouldn't be overlooked is the location of the amplifier. The amplifier must be located in a position where it has good airflow to ensure that it doesn't overheat. In the event of overheating the amplifier will probably shutdown or at worst it will fail.

It should also be located somewhere where it will not be exposed to electromagnetic radiation such as too close to the engine etc.

An good quality sound system will make an excellent addition to any modified cars.

Choosing a Car Stereo

With the huge choice of car audio equipment available today it is often difficult to decide what car stereo would best suit your needs. This article will hopefully help you negotiate the technical minefield and make the best choice for your requirements.

There are two main contributing factors to the quality of the audio that is produced by any audio equipment which are the frequency response and signal-to-noise ratio (SNR). The frequency response of the ear is around 20Hz to 20KHz although this often diminishes with age. A 'loud' facility is sometimes provide to boost the frequencies that become degraded with age. The SNR is important as it is what constitutes the background hiss that is often associated with cheaper audio equipment.

The car stereo or head unit today can play audio from a wide variety of sources which we will now discuss below.

Cassette Deck

If the reason for replacing your car stereo is to allow you to play your CD's or music from your iPod then please be aware that it is possible to purchase equipment that allows you to play music from an external source. These specialised adapters look like a cassette with a flying lead that plugs into your alternate music source ie iPod, CD player etc. This is often a very cheap and easy alternative if funds are tight!

Audio Cassettes in general do not give as good an audio experience as CD players as their frequency response and SNR is often inferior to that of modern digital equipment.

Although cassette tape sales have declined extensively it is still possible to purchase due to the amount of tapes that are still out there however as a long term investment a CD or MP3 player would probably be a better choice.

CD player

The CD has been around for many years now and is well established in the market-place. A CD can store its information in a multitude of formats but the most popular at the moment is usually just referred to as an Audio CD in the specifications. These are the CD's that you can buy of the shelf from any major music retail shop.

As with all technology the the common audio format is under threat by a relatively new format referred to as MP3. MP3 is a digital audio compression technique that allows much more audio to be squeezed onto a single CD. A typical compressed song will be roughly 4-6MB depending upon the quality of the audio and a typical CD can store around 700MB of data. So you can see that you can store many more songs using MP3 technology than with the conventional music CD's.

It is also possible to purchase a head unit that has a remote CD player or CD changer. A CD changer is like a mini duke box that can be located in your boot, glove compartment etc. They typically have between 6 and 12 CD's within them and often support the ability to play songs randomly between all the CD's.

USB/Memory Card

With the rapid adoption of MP3 format and the availability of cheap USB memory sticks car audio manufacturers have started to adopt USB ports on their equipment as standard. A USB stick or memory card can be thought of as a very small CD usually about a couple of inches long and about half an inch wide but capable of storing vastly more information than a conventional CD. Something to check when buying a head unit supporting this feature is the upper memory limit of the USB stick or memory card. Typical memory cards today are around 2-4GB which would store many albums however these sizes may not be supported by the head unit.

If you purchase a head unit supporting this type of media then you'll need to make sure that you have a method of getting the music from you CD collection onto the memory stick. This will involve 'ripping' the audio and copying it onto the memory. There are many programs available for doing this such as Windows Media Player.

Radio

Most people are familiar with car radio's and understand what to look for when purchasing one. However something to keep in mind when looking is the uptake of DAB radio which is the new digital transmission method.

DAB radio uses modern digital compression techniques to offer a greater variety of music and programmes as well as short messages etc that often appear of the display. Since this is a new format and isn't widely adopted as the mainstream format most DAB radios also still support FM transmissions.

The DIN form factor

Finally something which should be overlooked is the form factor and connections for the head-unit. With early cars there wasn't really a standard which led to all sorts of problems when replacing the factor standard unit. However there is now a standard size referred to as the DIN which is 2 1/8" (50mm) tall and 7 1/8" (180mm) wide and double-DIN which is twice as tall as the standard DIN size.

The connectors used to plug the stereo in are fairly common but there is no one standard connector. Luckily due to the size of the problem there are many different types of adaptor readily available in most car audio shops.

One problem often experience with fitting new audio equipment is with the memory 'forgetting' its settings. This is often due to the power supply wires to the head unit being switched over. To over come this problem the manufacturers of the cabling adapters easily enable the yellow and red wire to be interchanged which will fix the problem.

It is always worth checking out many retailers before making a selection on a head unit and I would recommend searching an automotive directory for the best choice.

First stop news on the adventure!

Erie Flathead Club hosted The Rolling Bones last night on their first leg of the WHERE IN THE WORLD ARE ROLLING BONES cross country adventure to SEMA. Keith Cornell and Ken Schmidt met with about 40 Erie area rodders at the Quaker Steak and Lube for a few hours. Thank you to Steve for organizing the group! Bright and early this morning, Keith and Ken were sipping coffee with Jeff at Tregler’s Precision Services in Fairview , PA. Specializing in racing and high performance engines, Tregler’s was a great way to get the motor running this morning!

Next stop is the Road Rockets Custom Car Club at Culbertson’s Rod & Custom Shop in Indy ( 1815 South Lynhurst Drive ). If you’re in the area, the fun starts at 7pm tonight. Thanks to Tom and Naomi for gathering friends, family, customers and fellow rodders to meet and greet Ken and Keith on their 2nd day of their journey!

ADVENTURE ADDENDUM

We’ve added an additional stop to the tour!! On Halloween evening (Saturday, October 31st), Ken and Keith will be swinging through Jamie Johnson’s Hot Rod Haven in Albuquerque . This world-renowned shop is located at 2215 Edith NE in Albuquerque . Thanks to Jamie for hosting this last gathering before the last leg to Las Vegas ! Hope to see you there!

Pictures to follow soon!

The cross country adventure to SEMA has begun!

The Where In The World Are Rolling Bones cross country adventure to SEMA started today!!

Hot Rod? Check.

Books? Check.

Maps? Check.

Ken and Keith? Check. Check.

Speeding Ticket? Check.

The Rolling Bones Cross Country Adventure to SEMA started bright and early this morning... with a speeding ticket! Even before they hit the highway, Keith got a speeding ticket on the way to pick up Ken this morning. The best part? The guys only live 10 miles apart. I guess they were excited to get the WHERE IN THE WORLD ARE THE ROLLING BONES adventure started!

Rolling Bones arrive in Erie , Pennsylvania this afternoon and will hang with Erie County Flatheads Club tonight at the Quaker Steak & Lube ( 7851 Peach Street , Erie ), 7pm. All rodders in the area are welcome to come!

Don't forget to check back again to read what happens when they get there and see some pictures of the turn out!

Lowrider Arte

When people think of Lowriders the first thing that most people with think of is the ground-scraping stance and the bouncing of Hydraulic competitions. However there is much more to the Lowrider scene than dropping the suspension and one major area is that of Lowrider Arte.

The creation of the Lowrider scene can be traced back to the late 60s and was due to the mixing of several cultures which were the California car culture and the Mexican culture.

Lowrider Arte is not confined to using a Lowrider as the canvas and extends to Tattoos, paintings and most other art forms. The Lowrider Arte magazine is solely dedicated to providing an outlet for Lowrider artists and features articles and tattoos, car drawing and much more.

Serious Lowrider car enthusiasts spend a great deal of time on all aspects of their creation with attention to detail being paramount to their success in Lowrider competitions. During the build the car will be completely stripped and many of the major components of the car will be as detailed including chrome plating and air-brushing. Often the bodywork, door shuts, boot, engine compartment will feature murals and fantastic works of art.

'32 Ford Deuce

This is a big heavy book that will have your both a little more muscular and more knowledgeable after reading it! It is actually an extended version of a book originally about the Deuce. The book now has 75 of the best Deuces that have shaped history to celebrate the 75th anniversary of the Deuce.

The beginning of the book is devoted to the history of Ford with an interesting insight into how Ford operated as a company. It is packed with photos of early prototypes, production lines and designs and tells of how the Ford V8 was a move to go 2 cylinders better than the competition which were mainly using 6 cylinders. Henry Ford also tried to avoid using a water pump in the design to cut down on production costs which were always his key objective in any new project.

The 75 Deuce Hot Rods at the end of the book include cars from Bruce Meyer, Boyd Coddington and Dan Fink. The pictures are large and very hi-resolution and each section has a small piece of interesting text about the car and its creator.

You can see the entire review plus some 32 Ford Deuce pictures here.

Where in the world are the Rolling Bones?

Rolling Bones, one of the nations best-known hot rod shops, is teaming up with Motorbooks and rodders across the country on an adventure to SEMA! Ken Schmidt and Keith Cornell (aka Rolling Bones) will drive their 1932 Ford Three Window Coupe from their shop in Ballston Spa , New York to Las Vegas . Their final destination would be the Motorbooks booth (#22393) at SEMA! Rolling Bones were featured in Peter Harholdt and Ken Gross’ book Art of the Hot Rod(which recently won a GOLD medal at the International Automotive Media Awards and author Ken Gross won the Lifetime Achievement Award) and Peter Vincent’s Hot Rod Garages. They will be meeting with hot rod enthusiasts and builders all the way across the country… and selling books to pay for their gas!

Dates

• Monday, October 26th - Erie County Flathead Club hosts at the Quaker Steak & Lube ( 7851 Peach Street , Erie , PA ), 7pm

• Tuesday, October 27th - Road Rockets Custom Car Club in Indianapolis hosts at Culbertson’s Rod & Custom Shop ( 1815 South Lynhurst Drive , Indianapolis , IN ), 7pm

• Wednesday, October 28th - Regional Streeters in Crown Point , Indiana hosts at Schoops Hamburgers ( 1124 N. Main Street , Crown Point , IN ), 5pm

• Thursday, October 29th - Morfab Customs in Union , Missouri hosts ( 79 Hi-Line Drive , Union , MO ) hosts, 6pm

• Friday, October 30th - Darryl Starbird Custom and Hot Rod Hall of Fame hosts (55251 E. Hwy 85A, Afton, OK) 1pm

• Saturday, October 31st - Bozo’s Garage in Santa Rosa hosts ( 2601 Will Rogers Drive , Santa Rosa , NM ), 2pm

• Sunday, November 1st - Heading to Vegas!

You can see the route that the guys from Rolling Bones will take across the states in the map below;

The Rolling Bones Route

The guys below will be performing the adventure in the hot-rod (also shown below) if you're in the vicinity and see them don't forget to give them a wave!

Rolling Bones Coupe Hot-Rod

The Intrepid Explorers

If you’re interested in following their progress as they drive cross country, become a friend of Motorbooks on FACEBOOK or check out this blog.

New Biography/About Me

We have now modified the members section to allow them to upload a picture of themselves together with some information. A good example can be seen for Kate in the lowrider models gallery.

Hot Rod History

The Hot Rodding culture dates back to the late 1940's and the end of World War II mainly in southern California. It was fuelled by a period of peace and growing prosperity as well as the enthusiasm of young men returning from war with newly acquired mechanical skills.

After the war there was a plentiful supply of mainly early fords such as Model T's and Model A's that became an excellent choice for tuning and improving the performance. At this time in history performance parts weren't available and these came later with the car tuning pioneers such as Edlebrook, Offenhauser, Weber and many more. At this point for those who didn't have access to machinery or the know how to improve the engines performance the main option was to improve the power to weight ratio of the vehicle. This was easily achieved by removing some parts such as the wings, running boards etc. To those with the facilities other enhancements were made such as channeling the body over the chasis rails to improve the stability and performing a roof chop to reduce the drag.

Over a relatively short period of time the aftermarket tuning parts industry became big business, with the illegal street racing eventually evolving into the new sports such as NASCAR and drag racing that we see today.

The original drag racing strips were much wider and longer than they are today and were mainly formed from disused landing strips that had been created for war-time purposes. As drag racing became increasingly more popular it became evident that a central body was required to ensure that certain levels of quality and safety were met which led to the formation of the National Hot Rod Association (NHRA). The NHRA was formed by Wally Parks in 1951 in Southern California and today is one of the largest motor sports bodies in the world.

Hot Rod Evolution

In the 1970's there was a drive to improve the efficiency of cars which led to an overall loss in power for most manufacturer's cars. Due to the high fatality rates caused by accidents around the 1970's there was also a drive to improve the safety of all vehicles which mainly required the removal of hard objects from directly in front of the driver etc. All these changes in the main stream motor industry forced hot-rodding to evolve as well with cars hot-rods being safer and more fuel efficient. This new stream of hot-rods are now referred to as Street-Rods and are built to be driven and more family friendly. To oversee these changes a new governing body was formed in a similar vein to the NHRA which was called the National Street Rod Association (NSRA). Where the NHRA's primary focus is on safety on the drag strip the NSRA's focus at events with an inspection team that checks everything before the event starts.

The definition of a street-rod is a car that was manufactured in 1948 or earlier that has been modified to meet the owners requirments. The usual upgrades that take place are things like the drive train, interior, audio equipment etc.

To see then entire artciles including hot rod and street rod pictures click here.

The Cal Look

A stock Volkswagen Beetle is comparatively underpowered by modern standards and even as early as the 1950's companies were developing aftermarket performance product for Volkswagen owners that wanted a little more power. After a short period of time Beetles began entering drag racing competitions and holding their own on the strip.

In the 1960's enthusiasts (particularly in California) started to emulate these drag racing cars by stripping of all the chrome, upgrading the wheels and tyres and modifying the front suspension to give a nose down appearance. This style became the foundation of the Cal Look that we see today although it has evolved over time.

Today the Cal Look has become incredibly popular mainly due to the relative inexpensive of the Volkswagen Beetles and the cost involved in creating an eye-catching Cal Look example. There is a myriad performance parts available compared to those available in the 1960's and unleashing large amounts of power from the flat-four engine is fairly achievable on a modest budget.

One of the main features that identifies the Cal Look is the smooth body where most or all the exterior trim etc has been removed. This can be traced back to its drag-racing roots where reducing the curb-weight of a car is a key ingredient in achieving a good time on the drag strip. The steel wheels are also usually replaced with lighter alloy wheels with popular choices being Porsche Empi 5 or 8 spoke wheels. The choice of 5 or 8 spoke is mainly determined by the age of the car they are being installed on because older Volkswagen's had 5 studs whereas the later one only have 4 studs.

A common popular half-way variant on an all-out Cal Look is the Resto Cal Look. These Volkswagens are essentially stock with the exception of a lowered stance and tuned engine. They are often fitted with aftermarket period accessories such as roof-racks, fender-skirts and air conditioning units.

The Cal Look is no longer only popular on Volkswagen Beetle and is now also very popular with Campers, Ghia's and Type 4's.

In Stephan Szantai Demon Bugs book he gives many examples of Cal and Resto Cal Volkswagen's. To see the entire article together with some Cal Look pictures then click here.

Volks Rods

The Volksrod is really a hot-rod that is based on a Volkswagen Beetle but in the style that you may expect from Hot Rods build from Model T Fords or Model A Fords. Some believe that the scarseness of old cars to modify and customise has led to the increased popularity of volksrods while others suggest it could be due to the customising community looking for something a little bit different.

A Volksrod is easily identified as it will usually be in the style of a Rat-Rod and most commonly painted matt black. The wings are usually removed and replaced with wheel hugging mud-guards, to prevent stones from damaging fellow drivers cars.

The front suspension is either moved forward to make the wheel-base look longer with some reworking of the stock suspension and steering components. Another popular modification is remove the stock suspension and steering components and fit the suspension from an early Ford. This popularity of this modification has lead to the creation of several kits that have been made available.

To see the entire article together with some volks rod pictures click here.

Rat Rods

A Rat Rod is difficult to define but you know when you see one! They are often based on cars from the 1940's to the 1960's but some examples are as recent as the 1970's. Some Hot-Rods are assembed from a selection of parts usually dating around the 1930's.

To the people not familiar with Rat Rods these cars may appear unfinished and shoddy but that couldn't be further from the truth. Rat Rods were originally developed as an alternative to the glossy high-price Hot-Rods which were never driven and trailored to shows. Rat Rods are all about the fun of building and driving them and appearance take second place. The majority of Rat Rods that are seen at the shows will be dented and rusty but importantly they will have been driven there. If a part needs to be replaced then the owner will often fabricate the part themselves of fit a part that does the job equally well. If the Rat Rod is painted at all it is usually matt black or primered and often will have Maltese crosses on the doors and skull accessories such as the gear-shifter.

For the builders of these cars it is all about building a car that performs well both in speed and acceleration as well as handling and braking. For that reason the majority of the 'comfort items will be stripped away such as headlining, interior trim to give the best power to weight ratio possible. Many of the cars have heavily modified bodies and are often roof-chopped, channelled, lengthened, shortened etc.

The typical choice of engine for a Rat Rod is a V8 which would probably be a Ford Flathead V8 or an early Chrysler Hemi.

To see then entire article together with some Rat Rod pictures click here.

Lowrider Suspension

There are several options that are available to lowrider enthusiasts to achieve the desired 'in the weeds' look. These include dropped spindles, chopping the suspension springs, hydraulic systems and airbag systems. In the modern lowrider culture airbags or hydraulics are usually preferred over dropped spindles or chopped springs since the ride height is adjustable.

Airbag Suspension

The use of airbag technology is now the most common type of suspension modification due to its price and simplicity. A cheap system can cost about $400 to install leading up to about $1000 for a more advanced system.

To create an adjustable ride the coil springs are replaced with a rubber bag that is filled with air from a central reservoir which is filled using an air compressor. To raise the car the bags are inflated with air and to lower the car the bags are deflated. A simple system consists of a air-bags, a compressor, a reservoir and control unit.

It is important not to drive with the suspension completely lowered all the time as it can lead to premature failure of the airbag itself as the rubber will become fatigued. It is also probably dangerous and impractical due to the inability to move the wheels fully as they will be tucked up under the wheel-arches. Conversely riding with the suspension fully raised will lead to a very harsh ride and may cause cracking around the mounting points of the airbags.

While airbags give the ability to adjust the ride height it tends to be slower than its hydraulic counterpart.

Hydraulic Suspension

With a hydraulic installation it is possible to make the jump, bounce and hop due to the speed at which the ride height can be adjusted. In the air-bag system the suspension spring is replaced with a rubber bag that is filled with air in the hydraulic system however the spring is replaced with a bladder that is filled with fluid under immense pressure very quickly. This rapid expansion causes the car to lift very rapidly and depending upon the speed of the flow can cause the car to jump of the ground.

The pumps required to fill the bladders are very power-hungry and often require the lowrider having several batteries to make the system successful. The flow to each bladder, usually at each corner of the car, can be controlled independently using a solenoid valve that can be switched to give the appearance of dancing. In many cases it would be unsafe to be in the car whilst the car is moving so the switches for the solenoids are made externally accessible.

Installing a hydraulic system on a lowrider can be very expensive when compared to the airbag system.

Hi-Risers - Donks, Bubbles and Boxes

The term Hi-Riser refers to a modified vehicle that has been modified in such a way to that the ground clearance has been increased greatly over the factory standard. This is achieved by adding large oversize wheels with very low profile tyres. The sizes of these wheels are typically between 20-26 inches but with the demand to get bigger and bigger some cars now feature 28 inch wheels and maybe more.

To get such large wheels to fit into the wheel arches the owners of the hi-risers have had to adopt modifications commonly seen on monster trucks and kits are available to give the car the required lift. Particular attention must be paid to the braking system due to the increase diameter of the wheels and the suspension in general which needs to be stiffened to avoid excessive roll when cornering.

Inexpensive automobiles are commonly used to create a Hi-Riser and the model and its age will determine which category the Hi-Riser is in. The most popular models that are used in the creation of a Hi-Riser are the full-size Chevrolet cars such as the Impala, Caprice, Monte Carlo, and Chevelle. A Box is usually a 1970-1990 Caprice or Impala and so called due to their squared off front and rear ends, giving a box-like appearance. A Bubble is usually a 1990 Caprice or Impala and so called because they are rounded at both ends.

A Donk is in a league of its own and is generally created from a mid 1970s Impala, Caprice and Monte Carlo or any mid 1970s ride with a sloping rear end. The stance of a Donk is very important and is slightly different to a Box or Bubble in that the front of the car is slightly higher than the rear, giving a nose in the air appearance. The name Donk has come from the "badonka-donk" noise that the rear suspension makes when it goes of bumps in the road.

Other manufacturers that are commonly chosen for Hi-Risers are Buick, Pontiac and Oldsmobile.

50 Years of Hot Rod

Most car enthusiasts will be familiar with the Hot Rod magazine and this book is a chronical of Hot Rod magazine. The books is categorised into 5 chapters covering the fifties, the sixties, the seventies, the eighties and lastly the nineties.

In the fifties the magazine was mainly covering the drag racing as it evolved into the sport we see today and the formation of the NSRA.

Through the sixties the magaizine covered the big names such as Mickey Thompson, the Summers Brothers and Art Arfons as they became legends in the newly formed automotive arena. As well as covering drag and competition Hot Rod also had pictures of some of the amazing creations by big names such as Ed Roth.

As time progressed hot rodding and car customising became a huge industry and with the arrival of names like Boyd Coddington in the nineties a Hot Rod became the new must have accessory. Celebrities such as ZZ Top all put in their orders for the next cool ride the majority of which adorned the pages of the Hot Rod magazine.

It is interesting to see how the hot rod and car customising community has formed throughout the last 50 years and this book shows it in a very visual and easily digestible format.

If you would like to see the whole review of 50 Years of Hot Rod then click here.

Merchants of Speed: The Men Who Built America's Performance Industry

This book is for budding automotive historians everywhere and describes how the all majority of the big names in performance parts came into existance. This is a very big book packed with pictures from the various companies founders private collections showing the small garages and workshops where it all began.

Through the book many of the founders tell their tales of the relentless quest to go faster and the lengths they went to to achive this, sometimes leading to the inevitable accident.

The following big-names are listed in the book without whom the hot-rodding world maybe a very different (and slower) place:

• Ansen
• Braje
• Crane
• Edelbrock
• Engle
• Evans
• Herbert
• Hilborn
• Howards
• Iskenderian
• McGurk
• Navarro
• Offenhauser
• Potvin
• Scott
• Sharp
• Spalding
• Tattersfield-Baron
• Thickstun
• Wayne
• Weber
• Weiand
• Wilson

You can see the whole review of Merchants of Speed: The Men Who Built America's Performance Industry by clicking here.

About The Author
A longtime hot rod and drag racing enthusiast, Paul D. Smith split his time between Southern California and his native Canada while writing and researching this, his first book. Today he resides in Orillia, Ontario.

The Complete Book Of Dodge And Plymouth Muscle

If you are a fan of classic American muscle cars then this book will definately appeal to you! It is packed from cover to cover with pictorial history of the Dodge and Plymouth cars from 1960 through to 1974. If it was build by Dodge or Plymouth then you'll find it in this book.

The book is divided into 10 sections each one giving detailed information on a specific model. As well as pictures of pristine examples of each car there are lots of statistics such as wheelbase, original cost, compression ratio, horse power etc and there is also information about the history and development of that model during the years.

At the beginning of the book is an introduction which gives lots of interesting information about the development of the famous Hemi engine which is still a popular choice in many customised vehicles.

You can see the entire review and pictures of 'The Complete Book Of Dodge And Plymouth Muscle' by clicking here.

Art of the Hot Rod

There aren’t many books that everyone that sees it wants to borrow it but this is definately one of them! It is packed from cover to cover with hundreds of high-quality glossy pictures that will have any hot-rod enthusiast drooling!

The book covers 20 of the top hot-rod artisans whose attention to detail and quality is extremely high. Each chapter has a small amount of text introducing the person behind the cars and detailing what motivates them and where they get their inspiration. The following builders are each covered by the book;

* Dave Simard
* Jim Lowery Jnr.
* Rolling Bones
* Ken ‘Posies’ Fencial
* Alan Johnson
* Bobby Alloway
* Troy Trepanier
* Barry Lobeck
* Rick Dore
* Dave Crouse
* Donn Lowe
* Steve Frisbie
* Don Orosco
* Richard Graves
* Kennedy Brothers
* Pete Chapouris
* Zane Cullen
* Steve Moal
* Roy Brizio
* Vern Tardel

If you want to read the whole review and see some of the pictures from Art of the Hot Rod book then click here.

About the directory

The Just Customz website has always aimed to become a one-stop resource for the global car customising community and this has now become a step closer with the launch of their own web directory. The site attracts thousands of car enthusiasts every day and the addition of the new niche directory has been very popular. The directory lists everything from magazines to those difficult to find parts, accessories and services

The directory is broken down into an easy to navigate hierarchical structure starting with similar all-encompassing sites, like Just Customz, and filtering down to those difficult to find niche directories such as custom car insurance etc.

If you are a supplier of an automotive related service, facility or store you may be asking yourself why you should become part of this directory. There are two big advantages to becoming part of the directory which are:

a. Access to a huge volume of potential daily traffic that will be consumers of the service that you provide.

b. Many of the main search engine algorithms use inbound links as a measure of popularity and directly affect the positioning of a site in the search results.

If you read around the subject of link building, particularly with regard to directories, you’ll see that human edited and moderated directories often (not always) rate more highly than many of the free link farms that are available. You’ll also read that the more specific a directory is then the higher its value from a search engine perspective. It is important that your site is submitted to the correct sub-directory to gain the optimum benefits of the inclusion. This is because each sub-category is very specific and targeted at a very particular sub-set of keywords.

New Directory

I have finally updated the directory on the site now. It now behaves in the same way as all the on the web and accepts both non-reciprocal and reciprocal links. The directory is broken down into a hierarchy of categories that each have a topic relevant to the car customising community and will hopefully be of use to my visitors.

Mickey Thompson Book Review

The tragic story of Mickey Thompson as told by Erik Arneson is a compelling read and is difficult to put down. The book opens with a touching foreword by Mickey Thomspon's son, Danny Thompson, before explaining in the first chapter how Mickey and his wife Trudy were both shot outside their home.

The book paints a picture of a charismatic and very determined man that achieved great things. Mickey was very good using the media to his advantage and often used it to help fund his next beig project.

Mickey was alway an innovator and this was proved when he decided to form his own team for the indy car racing. His new low center-of-gravity cars blew away the competition and led others to quickly follow. There is a also an explanation of how the famous Mickey Thompson tyres came about when Mickey realised the only way to get ahead of the competition in the indy car racing!

About the Author

Erik Arneson was a design editor and motorsports reporter for USA Today, winning the NHRA’s Media Award in 1998 .He then became active in motorsports public relations. Today, he is director of public relations for SPEED Channel. This is his first book.

You can see more about the book here.

Caching

Today I have increase the caching on the index pages to reduce the load on the server and improve the user experience.

Better Navigation

I have now finished adding the new navigation trail at the top of each gallery page. This should improve the way a user moves around the site.

More Pictures

I have been chatting to some guys on Flickr about their pictures and they have agreed to let me show some of their pictures on my site. There are some fantastic rides out there and it is great to be able to show them.

I have also been in contact with Kate Stone and she has been happy to show some of her pictures in my new Lowrider Girls section.

Lowrider Girls and Car Models page

I have been thinking about whether my site would benefit from a models section for some time now. I decided to bite the bullet and add a Lowrider Girls page here. I have also added a section into the members pages to allow people to upload images etc if they want. It could be good for aspiring models.

I also had my first article published on ezines which I feel pretty good about. I think I may write some more soon.

New Upload Page

I have been experimenting with a new upload process over the last couple of days which has now gone live this morning.

The old upload process was a bit confusing whereas this method is quick smooth and allows pictures to be easily added or deleted from gallery pages.

Book Reviews

I have just reviewed the excellent Old School Customs book that Motor Book recently sent me. It was a very good book showing how the scene developed over the years.

Old Shcool Customz is a big book that follows the history of car customisation from pioneers through to the modern day trail-blazers that we see in the magazines today. The book is boken down into three sections which are The Poineers, The Lifers and the Pacesetters.

If you are a 'pictures person' when it comes to books then this book may not be for you. Don't get me wrong there are hundreds of fantastic pictures in it but it is mainly biography of customising. It outlines how the scene evolved from the early days through to today in 3 very readable sections.

The Pioneer section covers some of the customisers that shaped the scene from its conception in the early days. The book covers Gene Winefield, Bill Hines and Darryl Starbird giving an insight into their roots and history.

The Lifer section covers what you could call the second generation of customisers. These men drew on the work performed by the pioneers and live and breath custom cars and hot rods. For them car customisation is a way of life and have chosen customising as a career and will do pretty much anything to keep it that way.

In the third section Alan refers to the Pacesetters, these are todays trail-blazers taking the custom tricks from the past and giving them some modern influences to keep them contemporary.

Lowrider, Custom Cars, Hot Rods and Aircooled VW's

Hello,

This is my first Blog page so bear with me! I will try and keep this up-to-date with the latest changes and news regarding the Just Customz site.

I have just created the following pages Lowrider, Hot Rod, Custom Truck, Aicooled VW's and Muscle cars which I hope people will like. I have tried to filter out things that people who like that particular genre of car will like to keep it relevant!